Plotting
Introduction
The plotting module allows you to make 2-dimensional and 3-dimensional plots.
Presently the plots are rendered using matplotlib
as a backend.
The plotting module has the following functions:
plot: Plots 2D line plots.
plot_parametric: Plots 2D parametric plots.
plot_implicit: Plots 2D implicit and region plots.
plot3d: Plots 3D plots of functions in two variables.
plot3d_parametric_line: Plots 3D line plots, defined by a parameter.
plot3d_parametric_surface: Plots 3D parametric surface plots.
The above functions are only for convenience and ease of use. It is possible to
plot any plot by passing the corresponding Series
class to Plot
as
argument.
Plot Class
- class diofant.plotting.plot.Plot(*args, **kwargs)[source]
The central class of the plotting module.
For interactive work the function
plot
is better suited.This class permits the plotting of diofant expressions using numerous backends (matplotlib, Google charts api, etc).
The figure can contain an arbitrary number of plots of diofant expressions, lists of coordinates of points, etc. Plot has a private attribute _series that contains all data series to be plotted (expressions for lines or surfaces, lists of points, etc (all subclasses of BaseSeries)). Those data series are instances of classes not imported by
from diofant import *
.The customization of the figure is on two levels. Global options that concern the figure as a whole (eg title, xlabel, scale, etc) and per-data series options (eg name) and aesthetics (eg. color, point shape, line type, etc.).
The difference between options and aesthetics is that an aesthetic can be a function of the coordinates (or parameters in a parametric plot). The supported values for an aesthetic are: - None (the backend uses default values) - a constant - a function of one variable (the first coordinate or parameter) - a function of two variables (the first and second coordinate or parameters) - a function of three variables (only in nonparametric 3D plots) Their implementation depends on the backend so they may not work in some backends.
If the plot is parametric and the arity of the aesthetic function permits it the aesthetic is calculated over parameters and not over coordinates. If the arity does not permit calculation over parameters the calculation is done over coordinates.
Only cartesian coordinates are supported for the moment, but you can use the parametric plots to plot in polar, spherical and cylindrical coordinates.
The arguments for the constructor Plot must be subclasses of BaseSeries.
Any global option can be specified as a keyword argument.
The global options for a figure are:
title : str
xlabel : str
ylabel : str
xscale : {‘linear’, ‘log’}
yscale : {‘linear’, ‘log’}
axis : bool
axis_center : tuple of two floats or {‘center’, ‘auto’}
xlim : tuple of two floats
ylim : tuple of two floats
aspect_ratio : tuple of two floats or {‘auto’}
autoscale : bool
margin : float in [0, 1]
The per data series options and aesthetics are: There are none in the base series. See below for options for subclasses.
Some data series support additional aesthetics or options:
ListSeries, LineOver1DRangeSeries, Parametric2DLineSeries, Parametric3DLineSeries support the following:
Aesthetics:
line_color : function which returns a float.
options:
label : str
steps : bool
integers_only : bool
SurfaceOver2DRangeSeries, ParametricSurfaceSeries support the following:
aesthetics:
surface_color : function which returns a float.
- append(arg)[source]
Adds an element from a plot’s series to an existing plot.
Examples
Consider two
Plot
objects,p1
andp2
. To add the second plot’s first series object to the first, use theappend
method, like so:>>> p1 = plot(x*x) >>> p2 = plot(x) >>> p1.append(p2[0]) >>> print(str(p1)) Plot object containing: [0]: cartesian line: x**2 for x over (-10.0, 10.0) [1]: cartesian line: x for x over (-10.0, 10.0)
See also
- extend(arg)[source]
Adds all series from another plot.
Examples
Consider two
Plot
objects,p1
andp2
. To add the second plot to the first, use theextend
method, like so:>>> p1 = plot(x*x) >>> p2 = plot(x) >>> p1.extend(p2) >>> print(str(p1)) Plot object containing: [0]: cartesian line: x**2 for x over (-10.0, 10.0) [1]: cartesian line: x for x over (-10.0, 10.0)
Plotting Function Reference
- diofant.plotting.plot.plot(*args, **kwargs)[source]
Plots a function of a single variable and returns an instance of the
Plot
class (also, see the description of theshow
keyword argument below).The plotting uses an adaptive algorithm which samples recursively to accurately plot the plot. The adaptive algorithm uses a random point near the midpoint of two points that has to be further sampled. Hence the same plots can appear slightly different.
Single Plot.
plot(expr, range, **kwargs)
If the range is not specified, then a default range of (-10, 10) is used.
Multiple plots with same range.
plot(expr1, expr2, ..., range, **kwargs)
If the range is not specified, then a default range of (-10, 10) is used.
Multiple plots with different ranges.
plot((expr1, range), (expr2, range), ..., **kwargs)
Range has to be specified for every expression.
Default range may change in the future if a more advanced default range detection algorithm is implemented.
- Parameters
``expr`` (Expr) – Expression representing the function of single variable
``range`` (tuple) – (x, 0, 5), A 3-tuple denoting the range of the free variable.
``show`` (Boolean, optional) – The default value is set to
True
. Set show toFalse
and the function will not display the plot. The returned instance of thePlot
class can then be used to save or display the plot by calling thesave()
andshow()
methods respectively.Arguments for ``LineOver1DRangeSeries`` class
``adaptive`` (Boolean, optional) – The default value is set to True. Set adaptive to False and specify
nb_of_points
if uniform sampling is required.``depth`` (int, optional) – Recursion depth of the adaptive algorithm. A depth of value
n
samples a maximum of \(2^{n}\) points.``nb_of_points`` (int, optional) – Used when the
adaptive
is set to False. The function is uniformly sampled atnb_of_points
number of points.Aesthetics options
``line_color`` (float, optional) – Specifies the color for the plot. See
Plot
to see how to set color for the plots.If there are multiple plots, then the same series series are applied to
all the plots. If you want to set these options separately, you can index
the ``Plot`` object returned and set it.
Arguments for ``Plot`` class
``title`` (str, optional) – Title of the plot. It is set to the latex representation of the expression, if the plot has only one expression.
``xlabel`` (str, optional) – Label for the x-axis.
``ylabel`` (str, optional) – Label for the y-axis.
``xscale`` ({‘linear’, ‘log’}, optional) – Sets the scaling of the x-axis.
``yscale`` ({‘linear’, ‘log’}, optional) – Sets the scaling if the y-axis.
``axis_center`` (tuple of two floats) – denoting the coordinates of the center or {‘center’, ‘auto’}
``xlim`` (tuple of two floats) – denoting the x-axis limits.
``ylim`` (tuple of two floats) – denoting the y-axis limits.
Examples
Single Plot
>>> print(str(plot(x**2, (x, -5, 5)))) Plot object containing: [0]: cartesian line: x**2 for x over (-5.0, 5.0)
Multiple plots with single range.
>>> print(str(plot(x, x**2, x**3, (x, -5, 5)))) Plot object containing: [0]: cartesian line: x for x over (-5.0, 5.0) [1]: cartesian line: x**2 for x over (-5.0, 5.0) [2]: cartesian line: x**3 for x over (-5.0, 5.0)
Multiple plots with different ranges.
>>> print(str(plot((x**2, (x, -6, 6)), (x, (x, -5, 5))))) Plot object containing: [0]: cartesian line: x**2 for x over (-6.0, 6.0) [1]: cartesian line: x for x over (-5.0, 5.0)
No adaptive sampling.
>>> print(str(plot(x**2, adaptive=False, nb_of_points=400))) Plot object containing: [0]: cartesian line: x**2 for x over (-10.0, 10.0)
- diofant.plotting.plot.plot_parametric(*args, **kwargs)[source]
Plots a 2D parametric plot.
The plotting uses an adaptive algorithm which samples recursively to accurately plot the plot. The adaptive algorithm uses a random point near the midpoint of two points that has to be further sampled. Hence the same plots can appear slightly different.
Single plot.
plot_parametric(expr_x, expr_y, range, **kwargs)
If the range is not specified, then a default range of (-10, 10) is used.
Multiple plots with same range.
plot_parametric((expr1_x, expr1_y), (expr2_x, expr2_y), range, **kwargs)
If the range is not specified, then a default range of (-10, 10) is used.
Multiple plots with different ranges.
plot_parametric((expr_x, expr_y, range), ..., **kwargs)
Range has to be specified for every expression.
Default range may change in the future if a more advanced default range detection algorithm is implemented.
- Parameters
``expr_x`` (Expr) – Expression representing the function along x.
``expr_y`` (Expr) – Expression representing the function along y.
``range`` (tuple) – (u, 0, 5), A 3-tuple denoting the range of the parameter variable.
Arguments for ``Parametric2DLineSeries`` class
``adaptive`` (Boolean, optional) – The default value is set to True. Set adaptive to False and specify
nb_of_points
if uniform sampling is required.``depth`` (int, optional) – Recursion depth of the adaptive algorithm. A depth of value
n
samples a maximum of \(2^{n}\) points.``nb_of_points`` (int, optional) – Used when the
adaptive
is set to False. The function is uniformly sampled atnb_of_points
number of points.Aesthetics
``line_color`` (function which returns a float) – Specifies the color for the plot. See
diofant.plotting.Plot
for more details.If there are multiple plots, then the same Series arguments are applied to
all the plots. If you want to set these options separately, you can index
the returned ``Plot`` object and set it.
Arguments for ``Plot`` class
``xlabel`` (str) – Label for the x-axis.
``ylabel`` (str) – Label for the y-axis.
``xscale`` ({‘linear’, ‘log’}) – Sets the scaling of the x-axis.
``yscale`` ({‘linear’, ‘log’}) – Sets the scaling if the y-axis.
``axis_center`` (tuple of two floats) – denoting the coordinates of the center or {‘center’, ‘auto’}
``xlim`` (tuple of two floats) – denoting the x-axis limits.
``ylim`` (tuple of two floats) – denoting the y-axis limits.
Examples
>>> u = symbols('u')
Single Parametric plot
>>> print(str(plot_parametric(cos(u), sin(u), (u, -5, 5)))) Plot object containing: [0]: parametric cartesian line: (cos(u), sin(u)) for u over (-5.0, 5.0)
Multiple parametric plot with single range.
>>> print(str(plot_parametric((cos(u), sin(u)), (u, cos(u))))) Plot object containing: [0]: parametric cartesian line: (cos(u), sin(u)) for u over (-10.0, 10.0) [1]: parametric cartesian line: (u, cos(u)) for u over (-10.0, 10.0)
Multiple parametric plots.
>>> print(str(plot_parametric((cos(u), sin(u), (u, -5, 5)), ... (cos(u), u, (u, -5, 5))))) Plot object containing: [0]: parametric cartesian line: (cos(u), sin(u)) for u over (-5.0, 5.0) [1]: parametric cartesian line: (cos(u), u) for u over (-5.0, 5.0)
See also
- diofant.plotting.plot.plot3d(*args, **kwargs)[source]
Plots a 3D surface plot.
Single plot.
plot3d(expr, range_x, range_y, **kwargs)
If the ranges are not specified, then a default range of (-10, 10) is used.
Multiple plot with the same range.
plot3d(expr1, expr2, range_x, range_y, **kwargs)
If the ranges are not specified, then a default range of (-10, 10) is used.
Multiple plots with different ranges.
plot3d((expr1, range_x, range_y), (expr2, range_x, range_y), ..., **kwargs)
Ranges have to be specified for every expression.
Default range may change in the future if a more advanced default range detection algorithm is implemented.
- Parameters
``expr`` (Expr) – Expression representing the function along x.
``range_x`` (tuple) – (x, 0, 5), A 3-tuple denoting the range of the x variable.
``range_y`` (tuple) – (y, 0, 5), A 3-tuple denoting the range of the y variable.
Arguments for ``SurfaceOver2DRangeSeries`` class
``nb_of_points_x`` (int) – The x range is sampled uniformly at
nb_of_points_x
of points.``nb_of_points_y`` (int) – The y range is sampled uniformly at
nb_of_points_y
of points.Aesthetics
``surface_color`` (Function which returns a float) – Specifies the color for the surface of the plot. See
diofant.plotting.Plot
for more details.If there are multiple plots, then the same series arguments are applied to
all the plots. If you want to set these options separately, you can index
the returned ``Plot`` object and set it.
Arguments for ``Plot`` class
``title`` (str) – Title of the plot.
Examples
Single plot
>>> print(str(plot3d(x*y, (x, -5, 5), (y, -5, 5)))) Plot object containing: [0]: cartesian surface: x*y for x over (-5.0, 5.0) and y over (-5.0, 5.0)
Multiple plots with same range
>>> print(str(plot3d(x*y, -x*y, (x, -5, 5), (y, -5, 5)))) Plot object containing: [0]: cartesian surface: x*y for x over (-5.0, 5.0) and y over (-5.0, 5.0) [1]: cartesian surface: -x*y for x over (-5.0, 5.0) and y over (-5.0, 5.0)
Multiple plots with different ranges.
>>> print(str(plot3d((x**2 + y**2, (x, -5, 5), (y, -5, 5)), ... (x*y, (x, -3, 3), (y, -3, 3))))) Plot object containing: [0]: cartesian surface: x**2 + y**2 for x over (-5.0, 5.0) and y over (-5.0, 5.0) [1]: cartesian surface: x*y for x over (-3.0, 3.0) and y over (-3.0, 3.0)
See also
- diofant.plotting.plot.plot3d_parametric_line(*args, **kwargs)[source]
Plots a 3D parametric line plot.
Single plot.
plot3d_parametric_line(expr_x, expr_y, expr_z, range, **kwargs)
If the range is not specified, then a default range of (-10, 10) is used.
Multiple plots.
plot3d_parametric_line((expr_x, expr_y, expr_z, range), ..., **kwargs)
Ranges have to be specified for every expression.
Default range may change in the future if a more advanced default range detection algorithm is implemented.
- Parameters
``expr_x`` (Expr) – Expression representing the function along x.
``expr_y`` (Expr) – Expression representing the function along y.
``expr_z`` (Expr) – Expression representing the function along z.
``range`` (tuple) –
(u, 0, 5)
, A 3-tuple denoting the range of the parameter variable.Arguments for ``Parametric3DLineSeries`` class.
``nb_of_points`` (int) – The range is uniformly sampled at
nb_of_points
number of points.Aesthetics
``line_color`` (function which returns a float.) – Specifies the color for the plot. See
diofant.plotting.Plot
for more details.If there are multiple plots, then the same series arguments are applied to
all the plots. If you want to set these options separately, you can index
the returned ``Plot`` object and set it.
Arguments for ``Plot`` class.
``title`` (str) – Title of the plot.
Examples
>>> u = symbols('u')
Single plot.
>>> print(str(plot3d_parametric_line(cos(u), sin(u), u, (u, -5, 5)))) Plot object containing: [0]: 3D parametric cartesian line: (cos(u), sin(u), u) for u over (-5.0, 5.0)
Multiple plots.
>>> print(str(plot3d_parametric_line((cos(u), sin(u), u, (u, -5, 5)), ... (sin(u), u**2, u, (u, -5, 5))))) Plot object containing: [0]: 3D parametric cartesian line: (cos(u), sin(u), u) for u over (-5.0, 5.0) [1]: 3D parametric cartesian line: (sin(u), u**2, u) for u over (-5.0, 5.0)
See also
- diofant.plotting.plot.plot3d_parametric_surface(*args, **kwargs)[source]
Plots a 3D parametric surface plot.
Single plot.
plot3d_parametric_surface(expr_x, expr_y, expr_z, range_u, range_v, **kwargs)
If the ranges is not specified, then a default range of (-10, 10) is used.
Multiple plots.
plot3d_parametric_surface((expr_x, expr_y, expr_z, range_u, range_v), ..., **kwargs)
Ranges have to be specified for every expression.
Default range may change in the future if a more advanced default range detection algorithm is implemented.
- Parameters
``expr_x`` (Expr) – Expression representing the function along
x
.``expr_y`` (Expr) – Expression representing the function along
y
.``expr_z`` (Expr) – Expression representing the function along
z
.``range_u`` (tuple) –
(u, 0, 5)
, A 3-tuple denoting the range of theu
variable.``range_v`` (tuple) –
(v, 0, 5)
, A 3-tuple denoting the range of the v variable.Arguments for ``ParametricSurfaceSeries`` class
``nb_of_points_u`` (int) – The
u
range is sampled uniformly atnb_of_points_v
of points``nb_of_points_y`` (int) – The
v
range is sampled uniformly atnb_of_points_y
of pointsAesthetics
``surface_color`` (Function which returns a float) – Specifies the color for the surface of the plot. See
diofant.plotting.Plot
for more details.If there are multiple plots, then the same series arguments are applied for
all the plots. If you want to set these options separately, you can index
the returned ``Plot`` object and set it.
Arguments for ``Plot`` class
``title`` (str) – Title of the plot.
Examples
>>> u, v = symbols('u v')
Single plot.
>>> print(str(plot3d_parametric_surface(cos(u + v), sin(u - v), u - v, ... (u, -5, 5), (v, -5, 5)))) Plot object containing: [0]: parametric cartesian surface: (cos(u + v), sin(u - v), u - v) for u over (-5.0, 5.0) and v over (-5.0, 5.0)
See also
- diofant.plotting.plot_implicit.plot_implicit(expr, x_var=None, y_var=None, **kwargs)[source]
A plot function to plot implicit equations / inequalities.
- Parameters
``expr`` (Expr) – The equation / inequality that is to be plotted.
``x_var`` (symbol or tuple, optional) – symbol to plot on x-axis or tuple giving symbol and range as
(symbol, xmin, xmax)
``y_var`` (symbol or tuple, optional) – symbol to plot on y-axis or tuple giving symbol and range as
(symbol, ymin, ymax)
If neither ``x_var`` nor ``y_var`` are given then the free symbols in the
expression will be assigned in the order they are sorted.
The following keyword arguments can also be used
``adaptive`` (Boolean, optional) – The default value is set to True. It has to be set to False if you want to use a mesh grid.
``depth`` (integer) – The depth of recursion for adaptive mesh grid. Default value is 0. Takes value in the range (0, 4).
``points`` (integer) – The number of points if adaptive mesh grid is not used. Default value is 200.
``title`` (str) – The title for the plot.
``xlabel`` (str) – The label for the x-axis
``ylabel`` (string) – The label for the y-axis
Aesthetics options
``line_color`` (float or str) – Specifies the color for the plot. See
Plot
to see how to set color for the plots.plot_implicit, by default, uses interval arithmetic to plot functions. If
the expression cannot be plotted using interval arithmetic, it defaults to
a generating a contour using a mesh grid of fixed number of points. By
setting adaptive to False, you can force plot_implicit to use the mesh
grid. The mesh grid method can be effective when adaptive plotting using
interval arithmetic, fails to plot with small line width.
Examples
Plot expressions:
Without any ranges for the symbols in the expression
>>> p1 = plot_implicit(Eq(x**2 + y**2, 5))
With the range for the symbols
>>> p2 = plot_implicit(Eq(x**2 + y**2, 3), ... (x, -3, 3), (y, -3, 3))
With depth of recursion as argument.
>>> p3 = plot_implicit(Eq(x**2 + y**2, 5), ... (x, -4, 4), (y, -4, 4), depth=2)
Using mesh grid and not using adaptive meshing.
>>> p4 = plot_implicit(Eq(x**2 + y**2, 5), ... (x, -5, 5), (y, -2, 2), adaptive=False)
Using mesh grid with number of points as input.
>>> p5 = plot_implicit(Eq(x**2 + y**2, 5), ... (x, -5, 5), (y, -2, 2), ... adaptive=False, points=400)
Plotting regions.
>>> p6 = plot_implicit(y > x**2)
Plotting Using boolean conjunctions.
>>> p7 = plot_implicit(And(y > x, y > -x))
When plotting an expression with a single variable (y - 1, for example), specify the x or the y variable explicitly:
>>> p8 = plot_implicit(y - 1, y_var=y) >>> p9 = plot_implicit(x - 1, x_var=x)
Series Classes
- class diofant.plotting.plot.BaseSeries[source]
Base class for the data objects containing stuff to be plotted.
The backend should check if it supports the data series that it’s given. (eg TextBackend supports only LineOver1DRange). It’s the backend responsibility to know how to use the class of data series that it’s given.
Some data series classes are grouped (using a class attribute like is_2Dline) according to the api they present (based only on convention). The backend is not obliged to use that api (eg. The LineOver1DRange belongs to the is_2Dline group and presents the get_points method, but the TextBackend does not use the get_points method).
- class diofant.plotting.plot.Line2DBaseSeries[source]
A base class for 2D lines.
adding the label, steps and only_integers options
making is_2Dline true
defining get_segments and get_color_array
- class diofant.plotting.plot.LineOver1DRangeSeries(expr, var_start_end, **kwargs)[source]
Representation for a line consisting of a Diofant expression over a range.
- get_segments()[source]
Adaptively gets segments for plotting.
The adaptive sampling is done by recursively checking if three points are almost collinear. If they are not collinear, then more points are added between those points.
References
- [1] Adaptive polygonal approximation of parametric curves,
Luiz Henrique de Figueiredo.
- class diofant.plotting.plot.Parametric2DLineSeries(expr_x, expr_y, var_start_end, **kwargs)[source]
Representation for a line consisting of two parametric diofant expressions over a range.
- get_segments()[source]
Adaptively gets segments for plotting.
The adaptive sampling is done by recursively checking if three points are almost collinear. If they are not collinear, then more points are added between those points.
References
- [1] Adaptive polygonal approximation of parametric curves,
Luiz Henrique de Figueiredo.
- class diofant.plotting.plot.Line3DBaseSeries[source]
A base class for 3D lines.
Most of the stuff is derived from Line2DBaseSeries.
- class diofant.plotting.plot.Parametric3DLineSeries(expr_x, expr_y, expr_z, var_start_end, **kwargs)[source]
Representation for a 3D line consisting of two parametric diofant expressions and a range.
- class diofant.plotting.plot.SurfaceOver2DRangeSeries(expr, var_start_end_x, var_start_end_y, **kwargs)[source]
Representation for a 3D surface consisting of a diofant expression and 2D range.